Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car

Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
- Maintenance instruction
   Arrangement and functions of governing bodies
   Keys and locks
   Adjustment of seats
   The equipment and governing bodies in salon
   Heater and air conditioner
   Control system of a microclimate of salon
   Audio system
   Security systems
   Running in of the new car
   Unlocking of a cowl
   The valve of shutdown of supply of fuel in case of accident (on some models)
   Start of the engine
   Five-step manual box of gear shifting
   Automatic transmission
   Stepless variator (separate models)
   Devices of external lighting and alarm systems of the trailer
   Check of level of liquid in automatic transmission
   Driving belts
   Emergency closing of the panel of the hatch of a roof
   Safety locks
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Emergency closing of the panel of the hatch of a roof

At failure of the electric drive of the hatch of a roof execute the following.


1. Check serviceability of the fuse of the electric motor of the drive of the hatch of a roof, see the Section Safety locks. If the safety lock burned down, replace it with the serviceable safety lock calculated at the same or smaller size of rated current.
2. Try to close the roof hatch panel. If the new safety lock at once fuses or the electric motor still does not work, you can close the hatch manually.
3. Get a tool set from a luggage carrier.

4. By means of the screw-driver or a coin remove a round cap which is located on a ceiling and closes a turnkey nest.

5. Insert the cut end of a cranked key into a roof hatch drive coupling nest. Rotating the key handle clockwise, completely close the roof hatch.

6. Take out a key from a nest of the coupling and establish a cap into place.