Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
- Power supply system and release
Specifications
Dropping pressure in a power supply system
Check of serviceability of functioning of the fuel pump/pressure of fuel
Check of a state and replacement of fuel lines and their nipple connections
Removal and installation of the fuel pump
Check of a state and replacement of the sensor of fuel consumption
Removal and installation of the fuel tank
Cleaning and repair of the fuel tank - general information
Removal and installation of assembly of the air cleaner
Removal, installation and adjustment of a cable of an accelerator
System of electronic injection of fuel (EFI) - the general information
Check of serviceability of functioning of system of injection
Removal and installation of the case of a throttle
Removal and installation of the regulator of pressure of fuel
Removal and installation of the fuel highway and injectors of fuel of injectors of fuel
System of release - the general information
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
Cleaning and repair of the fuel tank – general information
Performance of any repair of the fuel tank and its jellied mouth has to be entrusted to the experts having experience in carrying out such potentially dangerous works.|
|
Remember that even after cleaning and washing of a tank in it there can be explosive vapors of fuel capable to ignite during implementation of repair procedures! |
The fuel tank removed from the car should be transferred to such place where the possibility of its contact from any sort will be completely excluded by naked flame. Extra care in the address with the fuel tank should be shown in the garages equipped with the heating devices using natural gas and equipped with a control torch!