Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
- Brake system
Specifications
System of anti-blocking of brakes (ABS) - the general information and codes of malfunctions
Replacement of brake shoes of disk brake mechanisms
Removal, repair and installation of supports of disk brake mechanisms
Check of a state, removal and installation of a brake disk
Replacement of boots of drum brake mechanisms of back wheels
Removal and installation of wheel cylinders
Removal and installation of the main brake cylinder
Check of a state and replacement of brake lines and hoses
Pumping of the brake system
Check of serviceability of functioning/tightness, removal and installation of assembly of the vacuum amplifier of brakes
Adjustment of the parking brake
Replacement of a cable(s) of the drive of the parking brake
Check of serviceability of functioning, replacement and adjustment of the sensor switch of stoplights
Check of serviceability of functioning and replacement of the sensor switch of level of brake fluid
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
Specifications
General parameters
|
Characteristic |
Value |
|
Pedal of a foot brake |
|
|
Free wheeling, mm |
|
|
Civic |
1.6÷4.8 |
|
Integra |
1.6÷5.2 |
|
Height, mm |
|
|
Models with RKPP |
|
|
Civic |
153.2 |
|
Integra |
160.3 |
|
Models with AT/CVT |
|
|
Civic |
160.3 |
|
Integra |
165.1 |
|
Course of the lever of the parking brake |
See the Head Routine maintenance |
|
Gap between a pusher of the vacuum amplifier and the GTTs piston (with a depth of depression of 508 mm of mercury. on the amplifier), mm |
0.0÷0.5 |
Disk brake mechanisms
|
Characteristic |
Value |
|
Minimum admissible thickness of brake shoes |
See the Head Routine maintenance |
|
Minimum admissible thickness of a disk |
See marking on a disk |
|
Maximum admissible size of differences of thickness of a disk (overlapping), mm |
0.015 |
|
Maximum admissible beating of a disk, mm |
0.102 |
Drum brake mechanisms
|
Characteristic |
Value |
|
Minimum admissible thickness of frictional overlays of brake boots |
See the Head Routine maintenance |
|
Maximum admissible internal diameter of a drum |
See marking on a drum |
Efforts of tightening of threaded connections, Nanometer
|
Connection type |
Value |
|
Hollow bolt of nipple knot of connection of a brake hose to a support of the brake mechanism (forward and back) |
34 |
|
Bolts of a forward support |
|
|
Civic (see identification marking on the support case) |
|
|
Support of type 5410 |
33 |
|
Support of type 2056 |
34 |
|
Top bolt |
34 |
|
Lower bolt |
27 |
|
Integra |
|
|
Issue models from 1994 to 1997 |
31 |
|
Issue models since 1998. |
33 |
|
Bolts of fastening of an anchor bracket of a forward support |
108 |
|
Bolts of a back support |
56 |
|
Nuts of fastening of wheel cylinders |
9.5 |
|
Nuts of fastening of the vacuum amplifier of brakes |
12.2 |
|
Nuts of fastening of GTTs |
14.9 |