Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of assemblies of forward and back bumpers
   Removal and installation of forward wings
   Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back
   Removal, installation and adjustment of a door of a back
   Removal and installation of a latch, cylinder of the lock and emphasis of a cover of the luggage compartment
   Removal, installation and adjustment of a cover of the luggage compartment
   Driving cables of an otpuskaniye of locks of covers of the luggage compartment and hatch of a jellied mouth of the fuel tank
   Removal and installation of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of latches and cylinders of locks and external and internal handles of doors
   Removal and installation of door glasses
   Removal and installation of the regulator of a window regulator
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of an instrument guard
   Removal and installation of a forward fairing
   Removal and installation of seats
   + Control body sizes
+ Onboard electric equipment


5642a57a



Removal and installation of the dashboard

Considered in the present manual of the car are equipped with safety cushions (SRS). When performing any works near sensors of blows, a steering column or the dashboard disconnect SRS (see schemes of electric connections at the end of the Head Onboard electric equipment).

If the stereosystem established on the car is equipped with a security code before disconnecting the rechargeable battery make sure that you have the correct combination for input of the audio system in action!

Facing of an instrument guard

 PERFORMANCE ORDER

1. Lower a steering column in the lower situation.

2. Turn out two fixing screws with crosswise vents (see an accompanying illustration), then pull facing on yourself and release its clamps from assembly of an instrument guard.

3. Disunite interfering with facing removal electric sockets.
4. Installation is made upside-down.

Lower section of the dashboard

 PERFORMANCE ORDER

1. Turn out the lower bolts of fastening of the sound-proof panel to the lower casing of a steering column. Give screws of fastening of a cover of a casing of a column (see an accompanying illustration).

2. Lift bottom edge of a cover of a steering column up, then release the upper edge from clamps.
3. Disunite electric sockets and lower the lower section of the dashboard.
4. Installation is made upside-down.

Knee emphasis

 PERFORMANCE ORDER

1. Remove the lower cover of a casing of a steering column (see the previous subsection).

2. Give fixing bolts and remove a knee emphasis from the car (see an accompanying illustration).

3. Installation is made upside-down.

Ware box

 PERFORMANCE ORDER

1. Turn out two loopy screws (see an accompanying illustration), open a cover, squeeze lock uvulas of plastic clamps, omit assembly of a ware box down and take it from the dashboard.

2. Installation is made upside-down.

Central section

 PERFORMANCE ORDER

1. Remove forward section of the central console (see Removal and installation of the central console).
2. Turn out fixing screws and a bolt and remove the central section of the dashboard.
3. Installation is made upside-down.