Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car

Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
- Routine maintenance
   Schedule of routine maintenance
   Specifications
   General information about settings and adjustments
   Check of levels of liquids (each 400 km of a run or weekly)
   Check of a condition of tires and pressure of their rating (each 400 km of a run or weekly)
   Check of level of liquid of the power steering (each 4 800 km of a run or time in three months)
   Check of the ATF AT/CVT level (each 4 800 km of a run or time in three months)
   Replacement of motive oil and oil filter (each 4 800 km of a run or time in three months)
   Check of a state and replacement of brushes of screen wipers (each 12 000 km of a run or time in 6 months)
   Check, service and charging of the rechargeable battery (each 12 000 km of a run or time in 6 months)
   Check of a state, adjustment of effort of a tension and replacement of driving belts, (each 12 000 km of a run or time in 6 months)
   Check of a state and replacement of the hoses located in a motive compartment (each 12 000 km of a run or times in 6 months)
   Check of a condition of components of the cooling system (each 12 000 km of a run or time in 6 months)
   Rotation of wheels (each 12 000 km of a run or time in 6 months)
   Check of the brake system (each 12 000 km of a run or time in 6 months)
   Check of a condition of seat belts (each 24 000 km of a run or time in 12 months)
   Check and adjustment of gaps of valves (each 24 000 km of a run or time in 12 months)
   Replacement of the filtering air cleaner element (each 24 000 km of a run or times in two years)
   Check of a condition of components of a power supply system (each 24 000 km of a run or time in 12 months)
   Check of level of the RKPP gearbox oil (each 24 000 km of a run or time in 12 months)
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases (each 9600 km of a run or times in 6 months)
   Check of a state and replacement of spark plugs
   Check of a state and replacement of VV of candle wires, a cover and the runner of the distributor (each 48 000 km of a run or time in 24 months)
   Check and replacement of the valve of system of the operated ventilation of a case (PCV) (each 48 000 km of a run or times in 24 months)
   Replacement of the fuel filter (each 48 000 km of a run or time in 24 months)
   Check and adjustment of turns of idling (each 48 000 km of a run or time in 24 months)
   Service of the cooling system (depletion, washing and filling) (each 48 000 km of a run or time in 24 months)
   Replacement of brake fluid (each 48 000 km of a run or time in 24 months)
   Replacement of liquid of automatic transmission (AT/CVT) (each 48 000 km of a run or time in 24 months)
   Replacement of the RKPP gearbox oil (each 48 000 km of a run or time in 24 months)
   Dumping of the counter of the indicator of intervals of service
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Replacement of brake fluid (each 48 000 km of a run or time in 24 months)

Remember that brake fluid is chemically aggressive substance and demands extra care in the address. Do not allow hit of brake fluid in eyes, on open sites of skin and the painted surfaces of the car. Besides toxicity brake fluid differs in also high hygroscopicity (i.e. ability to accumulate moisture from air). Excessive moisture content of brake fluid leads to dangerous decrease in efficiency of functioning of system. Use only fresh brake fluid, do not leave it for a long time in leaky closed container.

PERFORMANCE ORDER

1. Replacement of brake fluid has to be made regularly and in strict accordance with the schedule of routine maintenance of the car (see the Schedule of routine maintenance). In advance prepare enough pure rags or paper towels for collecting the spilled liquid. For the purpose of protection of the painted body panels located in the neighbourhood impose with GTTs rags.
2. Prepare replaceable brake fluid of the required grade (see Specifications at the beginning of the Head).
3. Uncover the GTTs tank.
4. The manual pump, by means of the syringe or a rubber pear pump out the liquid which is present at the cylinder.
5. Fill in in the tank fresh brake fluid, having brought its level to the lower cut of a jellied mouth.
6. Watching liquid level in the tank, serially pump over all four brake mechanisms (see the Head the Brake system), trying to obtain the beginning of an exit from gates of their pumping of fresh liquid.
7. Double-check liquid level in the GTTs tank, in case of need make the corresponding adjustment. The brake pedal has to be squeezed out with a firm resistance – the feeling of softness of the course is inadmissible.

Do not start operation of the car at all being not absolutely sure of serviceability of functioning of brakes!