Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car


Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
- Routine maintenance
   Schedule of routine maintenance
   Specifications
   General information about settings and adjustments
   Check of levels of liquids (each 400 km of a run or weekly)
   Check of a condition of tires and pressure of their rating (each 400 km of a run or weekly)
   Check of level of liquid of the power steering (each 4 800 km of a run or time in three months)
   Check of the ATF AT/CVT level (each 4 800 km of a run or time in three months)
   Replacement of motive oil and oil filter (each 4 800 km of a run or time in three months)
   Check of a state and replacement of brushes of screen wipers (each 12 000 km of a run or time in 6 months)
   Check, service and charging of the rechargeable battery (each 12 000 km of a run or time in 6 months)
   Check of a state, adjustment of effort of a tension and replacement of driving belts, (each 12 000 km of a run or time in 6 months)
   Check of a state and replacement of the hoses located in a motive compartment (each 12 000 km of a run or times in 6 months)
   Check of a condition of components of the cooling system (each 12 000 km of a run or time in 6 months)
   Rotation of wheels (each 12 000 km of a run or time in 6 months)
   Check of the brake system (each 12 000 km of a run or time in 6 months)
   Check of a condition of seat belts (each 24 000 km of a run or time in 12 months)
   Check and adjustment of gaps of valves (each 24 000 km of a run or time in 12 months)
   Replacement of the filtering air cleaner element (each 24 000 km of a run or times in two years)
   Check of a condition of components of a power supply system (each 24 000 km of a run or time in 12 months)
   Check of level of the RKPP gearbox oil (each 24 000 km of a run or time in 12 months)
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases (each 9600 km of a run or times in 6 months)
   Check of a state and replacement of spark plugs
   Check of a state and replacement of VV of candle wires, a cover and the runner of the distributor (each 48 000 km of a run or time in 24 months)
   Check and replacement of the valve of system of the operated ventilation of a case (PCV) (each 48 000 km of a run or times in 24 months)
   Replacement of the fuel filter (each 48 000 km of a run or time in 24 months)
   Check and adjustment of turns of idling (each 48 000 km of a run or time in 24 months)
   Service of the cooling system (depletion, washing and filling) (each 48 000 km of a run or time in 24 months)
   Replacement of brake fluid (each 48 000 km of a run or time in 24 months)
   Replacement of liquid of automatic transmission (AT/CVT) (each 48 000 km of a run or time in 24 months)
   Replacement of the RKPP gearbox oil (each 48 000 km of a run or time in 24 months)
   Dumping of the counter of the indicator of intervals of service
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


5642a57a


Check of a state and replacement of brushes of screen wipers (each 12 000 km of a run or time in 6 months)

 PERFORMANCE ORDER

1. The condition of assemblies of screenwashes has to be checked regularly according to the schedule of routine maintenance of the car (see the Schedule of routine maintenance). Brushes look round on existence of mechanical damages, signs of weakening of fastening of components and wear of rubber working elements.
2. On working surfaces of brushes the road film accumulates over time that leads to noticeable decrease in efficiency of functioning of screen wipers. Regularly wash out brushes the cleaning solution of average concentration.
3. In the course of functioning of screen wipers there can be a gradual spontaneous otdavaniye of fixture which reliability of tightening also has to be checked regularly.
4. At identification of cracks or signs of wear of rubber working elements replacement of brushes is made.
5. Take away the screen wiper lever from glass.

6. Wring out inside a lock uvula and carefully remove a brush from a hook on the end of the lever (see an accompanying illustration).

7. In need of replacement of a working element of a brush strongly squeeze lock uvulas on the end of a brush, then grasp an element and, having pulled, take it from a frame (see an accompanying illustration).

8. Take from a rubber working element metal holders and fill them in grooves of a new element (see an accompanying illustration).

9. Fill an element in a frame, having tracked reliability of a zashchelkivaniye of lock uvulas.
10. Put on a brush the lever of a screen wiper and fill it in a hook, having tracked reliability of a zashchelkivaniye of a lock uvula.