Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
General information and precautionary measures
Search of causes of failures of electric equipment
Safety locks - the general information
Chain breakers
The relay - the general information and check of serviceability of functioning
Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
Check of serviceability of functioning and replacement of understeering switches
Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
Check of serviceability of functioning and replacement of switches of the dashboard
Check of serviceability of functioning of measuring instruments of a combination of devices
Removal and installation of a combination of devices
Removal and installation of the radio receiver and loudspeakers
Removal and installation of the antenna of the radio receiver
Replacement of lamps of head headlights
Adjustment of the direction of optical axes of head headlights
Replacement of block headlights
Replacement of lamps
Running fires of daylight (DRL)
Check of serviceability of functioning and replacement of an electric motor of the drive of screen wipers
Check of serviceability of functioning and replacement of a horn of a horn
Check of serviceability of functioning and recovery repair of a heater of back glass
Control system of speed (темпостат) - general information and check of serviceability of functioning
The electric drive of window regulators - general information and check of serviceability of functioning
The uniform lock - general information and check of serviceability of functioning
The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
Safety cushions - the general information
+ Schemes of electric connections - the general information
Check of serviceability of functioning of measuring instruments of a combination of devices
|
|
Considered in the present manual of the car are equipped with safety cushions (SRS). When performing any works near sensors of blows, a steering column or the dashboard disconnect SRS (see Safety cushions - the general information). You do not make check of the SRS models by means of any type of the diagnostic equipment. |
|
|
This procedure belongs only to measuring instruments of analog type. |
Measuring instruments of fuel consumption and temperature of the engine
All listed below checks are made at the included ignition (a key in position of ON).
If the arrow of the measuring instrument constantly is in zero situation (an empty tank, or the cold engine), check a condition of a safety lock. If a safety lock as it should be, find the block of the corresponding sensor (see the Head of the Power supply system and release [fuel consumption sensor], or the Head of the Cooling system and heating [temperature sensor]). For a moment close the sensor socket on weight. If there is a measuring instrument arrow throw, replace the sensor, otherwise by means of a wire crossing point ground the sensor plug on the back party of the measuring instrument (in case of need see schemes of electric connections at the end of the present Chapter). If when grounding the last plug of the shooter of the measuring instrument it is displaced in the maximum situation, the problem consists in malfunction of a condition of an electrical wiring on the site of a chain between the measuring instrument and the sensor. If the arrow remains in former (zero) situation, check the second plug of the measuring instrument on presence of tension on it. In the absence of tension replace the measuring instrument.