Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
General information and precautionary measures
Search of causes of failures of electric equipment
Safety locks - the general information
Chain breakers
The relay - the general information and check of serviceability of functioning
Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
Check of serviceability of functioning and replacement of understeering switches
Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
Check of serviceability of functioning and replacement of switches of the dashboard
Check of serviceability of functioning of measuring instruments of a combination of devices
Removal and installation of a combination of devices
Removal and installation of the radio receiver and loudspeakers
Removal and installation of the antenna of the radio receiver
Replacement of lamps of head headlights
Adjustment of the direction of optical axes of head headlights
Replacement of block headlights
Replacement of lamps
Running fires of daylight (DRL)
Check of serviceability of functioning and replacement of an electric motor of the drive of screen wipers
Check of serviceability of functioning and replacement of a horn of a horn
Check of serviceability of functioning and recovery repair of a heater of back glass
Control system of speed (темпостат) - general information and check of serviceability of functioning
The electric drive of window regulators - general information and check of serviceability of functioning
The uniform lock - general information and check of serviceability of functioning
The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
Safety cushions - the general information
+ Schemes of electric connections - the general information
Chain breakers
Breakers of a chain are used for protection of such components of system of onboard electric equipment as head headlights, resistors of modules of safety cushions, electric motors of the drive of window regulators/activators of door locks, etc.
On some models after operation breakers revert to the original state automatically. If the overload causing shutdown of the breaker had not incidental character, it is necessary to check a condition of the corresponding contour immediately. After malfunction elimination the chain breaker enters the normal mode of functioning again. Sometimes return of the breaker to the working condition should be made manually after elimination of the reason of an overload.
For introduction of the breaker to the working condition disconnect a negative wire from the battery.
|
|
If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action! |
Take the breaker, pass a thin core throughout specially provided opening in the case and push it in an opening before click. Then it makes sense to make sure conductivity by means of an ohmmeter available between plugs of the breaker and only after it to establish it into place.